Omron Varispeed CIMR L7C

OMRON Varispeed CIMR-L7C

Repair Options

  Standard:  2-3 days

  Urgent:  24-48 hours*

✓  Service Exchange:  48-hour replacement*

✓  Spare Unit:  Same unit as the original*

* Services subject to availability

About

The Varispeed L7 is a lift AC drive, a three-phase IGBT PWM inverter carrying a dedicated lift firmware set. Yaskawa engineered it and Omron sold it on its own badge through OMRON YASKAWA Motion Control, the European joint venture that ran from 2003 to 2009.

Twenty-three models cover 3.7 to 55 kW, the 200 V class rated 17.5 to 224 A and the 400 V class 8.5 to 128 A. Overload capacity is 150 per cent of rated output current for 30 seconds at an 8 kHz carrier, and closed loop vector control covers induction and permanent magnet machines with a 1:1000 speed range.

Braking hardware splits at 22 kW: below it an internal transistor works with a resistor on terminals B1 and B2, and from 22 kW upward an external CDBR braking unit is required. The specification character in the model number is decoded nowhere in the manual, so the nameplate is the only reliable identification.

Key Features

  • Closed loop vector control of both induction and permanent magnet motors

  • Speed control range of 1:1000 with 0.02% speed accuracy in closed loop vector

  • Rescue operation with light load direction search, plus short floor operation

  • EN81-1 conform wiring using a single motor contactor

  • Hardware baseblock meeting EN954-1 safety category 3, stop category 0

  • Up to three option cards at once, including PG-F2 for Hiperface and EnDat 2.1 encoders

Range Specifications

ManufacturerOmron
SeriesVarispeed L7 (CIMR-L7C specification)
Voltage classes200 V and 400 V; maximum motor capacities 3.7 to 55 kW (23 models)
Control methodSine wave PWM; Closed Loop Vector control for IM and PM motors, Open Loop Vector control, V/f control
Carrier Frequency8 kHz (higher carrier frequency possible with current derating)
Speed control range1:40 (V/f control), 1:100 (Open Loop Vector control), 1:1000 (Closed Loop Vector control)
Speed control accuracyplus/minus 3% (V/f control), plus/minus 0.2% (Open Loop Vector control), plus/minus 0.02% (Closed Loop Vector control) (25 degrees C plus/minus 10 degrees C)
Torque accuracyplus/minus 5%
Frequency range0.01 to 120 Hz
Overload capacity150% of rated output current for 30 sec.
Acceleration/Deceleration time0.01 to 600.00 s
Rated voltage (400 V class)3-phase, 380, 400, 415, 440, 460 or 480 VAC, 50/60 Hz
Allowable voltage fluctuation+10%, -15%
Allowable frequency fluctuationplus/minus 5%
Overvoltage protection200 Class Inverter: stops when main-circuit DC voltage is above 410 V; 400 Class Inverter: stops when main-circuit DC voltage is above 820 V
EnclosuresIEC IP00, NEMA 1, IEC IP20
Typical ApplicationsLift applications: special Lift functions and sequences, short floor operation, rescue operation with light load direction search

OMRON Varispeed CIMR-L7C Models

Voltage ClassMaximum Motor Capacity kWOutput Capacity kVABasic Model Number
200 V class3.77CIMR-L7X23P7
200 V class5.510CIMR-L7X25P5
200 V class7.514CIMR-L7X27P5
200 V class1120CIMR-L7X2011
200 V class1527CIMR-L7X2015
200 V class18.533CIMR-L7X2018
200 V class2240CIMR-L7X2022
200 V class3054CIMR-L7X2030
200 V class3767CIMR-L7X2037
200 V class4576CIMR-L7X2045
200 V class5593CIMR-L7X2055
400 V class3.77CIMR-L7X43P7
400 V class4.09CIMR-L7X44P0
400 V class5.512CIMR-L7X45P5
400 V class7.515CIMR-L7X47P5
400 V class1122CIMR-L7X4011
400 V class1528CIMR-L7X4015
400 V class18.534CIMR-L7X4018
400 V class2240CIMR-L7X4022
400 V class3054CIMR-L7X4030
400 V class3767CIMR-L7X4037
400 V class4580CIMR-L7X4045
400 V class55106CIMR-L7X4055

What we offer

✓  2-year warranty

✓  Fast service

✓  Experienced engineers

✓  Friendly customer service

✓  24/7 technical support

✓  Courier return service

✓  Global coverage

✓  Reliability

✓  Flexibility

✓  No fix no fee

✓  Low prices

✓  High quality